Con Pap Tex Equipments

Nitrile Rubber Tube, also known as Buna-N or NBR tube, is a synthetic rubber tube made from nitrile butadiene rubber, a material known for its excellent resistance to oils, fuels, and other petroleum-based products. Nitrile rubber tubes are widely used in industries where exposure to chemicals, oils, fuels, and solvents is common. These tubes are known for their strength, durability, and versatility, making them an ideal choice for many industrial, automotive, and manufacturing applications.

Key Features:

1. Oil and Fuel Resistance:

   • Nitrile rubber is best known for its resistance to oils, greases, and fuels, making it the preferred material for applications involving petroleum-based products. It is commonly used in automotive and industrial applications where exposure to oils, hydraulic fluids, and other lubricants is frequent.

2. Chemical Resistance:

   • In addition to oil and fuel, nitrile rubber tubes also offer resistance to a range of chemicals, including hydraulic fluids, solvents, and alkalies. This makes them suitable for applications in industries such as chemical processing, manufacturing, and transportation.

3. Abrasion Resistance:

   • Nitrile rubber tubes have a high level of abrasion resistance, ensuring that they perform well even in environments with heavy wear and tear. This durability helps to extend the life of the tube and reduces the need for frequent replacements.

4. Temperature Range:

   • Nitrile rubber tubes are capable of withstanding a wide temperature range, typically from -30°C to 120°C (-22°F to 248°F). This makes them suitable for use in a variety of environments, from cold temperatures to higher heat applications.

5. Tensile Strength and Flexibility:

   • Nitrile rubber provides a good balance of tensile strength and flexibility. This allows the tube to handle high-pressure applications while still maintaining the ability to bend and flex without cracking or breaking.

6. Low Compression Set:

   • Nitrile rubber has a low compression set, meaning it maintains its shape and does not deform easily under pressure. This ensures reliable performance in sealing and fluid transfer applications over time.

7. Good Wear Resistance:

   • The rubber’s resistance to wear and tear makes it ideal for high-stress environments. Whether used in machinery, equipment, or automotive applications, nitrile rubber tubes can withstand long-term exposure to physical stresses.

Silicone Rubber Tube is a highly versatile and durable tubing product made from silicone rubber, a synthetic polymer made from silicon, oxygen, carbon, and hydrogen. Silicone rubber tubes are known for their excellent resistance to high temperatures, flexibility, and non-reactivity, making them ideal for applications in industries that require high-performance, reliable, and safe material handling.

Key Features:

1. Temperature Resistance:

   • Silicone rubber tubes can withstand extreme temperatures, typically ranging from -50°C to 250°C (-58°F to 482°F), with some high-grade silicone versions able to tolerate even higher temperatures. This makes them suitable for both high-temperature and low-temperature applications without compromising their performance or integrity.

2. Chemical Resistance:

   • Silicone rubber is highly resistant to a wide range of chemicals, including acids, alkalies, solvents, and oils. While not resistant to all chemicals, silicone rubber tubes are ideal for applications that involve water, steam, and non-aggressive chemicals.

3. Flexibility and Elasticity:

   • Silicone rubber is incredibly flexible and elastic, which allows the tubes to bend and twist without cracking or losing their shape. This makes silicone rubber tubes suitable for installations in tight spaces or systems that require tubing to navigate curves and bends.

4. Non-Toxic and Biocompatible:

   • Silicone rubber is non-toxic and biocompatible, making it an excellent material for medical, food, and beverage applications where safety and hygiene are critical. It does not leach harmful substances, making it ideal for direct contact with food and pharmaceutical products.

Latex Rubber Tube is a flexible and versatile tubing material made from natural latex rubber. It is known for its excellent elasticity, high tensile strength, and resistance to wear and tear. Latex rubber tubes are widely used in various applications across industries such as medical, automotive, industrial, and laboratory settings due to their durability and flexibility.

Key Features:

1. Elasticity:

   • Latex rubber is highly elastic, meaning it can stretch to many times its original length without breaking. This property makes latex rubber tubes ideal for applications that require flexibility and the ability to expand and contract under pressure.

2. High Tensile Strength:

   • Latex rubber tubes have a high tensile strength, which allows them to withstand tension and high pressures without breaking. This feature makes them suitable for use in demanding applications, including those requiring fluid or gas transport under pressure.

3. Chemical Resistance:

   • While latex is not as chemically resistant as some synthetic rubbers, it still offers a good level of resistance to mild acids, alkalies, and water. However, it is not suitable for use with petroleum-based products or strong solvents.

EPDM Rubber Tube is a high-performance rubber product made from Ethylene Propylene Diene Monomer (EPDM), a type of synthetic rubber that offers excellent durability and resistance to a wide range of environmental and operational conditions. Known for its superior performance in extreme temperatures, harsh weather, and chemical environments, EPDM rubber tubes are widely used across various industries, particularly where flexibility, chemical resistance, and longevity are critical.

Key Features:

1. Weather and UV Resistance:

   • EPDM rubber tubes excel in environments with UV exposure, ozone, and weathering. They do not crack or degrade when exposed to the elements, making them ideal for outdoor applications. EPDM’s natural resistance to UV radiation ensures that the tube maintains its flexibility and performance even after prolonged exposure to sunlight.

2. Temperature Resistance:

   • EPDM tubes can withstand a wide temperature range, typically from -40°C to 150°C (-40°F to 300°F). This capability allows them to perform effectively in both cold and hot environments, making them suitable for industries that require extreme temperature tolerance.

3. Chemical Resistance:

   • EPDM rubber is resistant to a broad range of chemicals, including alkalis, acids, ketones, and alcohols. It also resists water and steam, which makes EPDM rubber tubes ideal for use in industries where exposure to harsh chemicals, oils, and water is common.

EPDM Rubber Cord is a high-performance sealing material made from Ethylene Propylene Diene Monomer (EPDM), a type of synthetic rubber known for its exceptional resistance to a wide range of harsh conditions. EPDM rubber cords are widely used for sealing, gasketing, and vibration dampening purposes in various industries due to their excellent weather resistance, flexibility, and durability.

Key Features:

1. Weather and UV Resistance:

   • EPDM rubber is highly resistant to ozone, UV radiation, and weathering, making it ideal for outdoor applications. This resistance helps maintain the integrity of the material even under prolonged exposure to sunlight and harsh weather conditions, making it perfect for sealing applications in outdoor environments.

2. Temperature Resistance:

   • EPDM rubber cords can withstand extreme temperature ranges, typically from -40°C to 150°C (-40°F to 300°F). This broad temperature tolerance makes EPDM ideal for both hot and cold environments, without losing its flexibility or performance.

3. Chemical Resistance:

   • EPDM is resistant to a wide variety of chemicals, including acids, alkalis, and ketones. It also resists water and steam, which makes it suitable for applications involving exposure to harsh chemicals, water, or steam.

4. Electrical Insulation:

   • EPDM rubber is a good electrical insulator, which makes it suitable for electrical and electronic applications where insulation is required. Its resistance to electrical currents helps prevent the risk of short circuits in certain applications.

5. Flexibility and Durability:

   • EPDM rubber cord maintains its flexibility even in low temperatures, allowing it to form tight seals without cracking or hardening. It is also highly durable, with good resistance to abrasion and wear, making it a long-lasting solution for sealing needs.

6. Vibration Dampening:

   • The rubber material effectively dampens vibrations, which is beneficial for applications in machinery or equipment where reducing noise and vibration is essential.

Neoprene Rubber Cord is a versatile and durable elastomeric material used across various industries for sealing, gasketing, and other applications requiring resistance to harsh conditions. Made from neoprene, a synthetic rubber known for its excellent physical properties, this cord is often used in environments where resistance to wear, ozone, oil, heat, and chemicals is necessary.

Key Features:

1. Durability:

   • Neoprene rubber cord is highly durable and resistant to cracking, aging, and wear, even in extreme temperatures and harsh environmental conditions. This makes it an ideal choice for applications in both outdoor and industrial settings.

2. Chemical and Oil Resistance:

   • Neoprene exhibits excellent resistance to a wide range of chemicals, oils, and solvents. This property makes it suitable for applications in automotive, chemical, and industrial equipment where exposure to oils, fuels, and various chemicals is common.

3. Temperature Resistance:

   • Neoprene rubber can withstand a broad range of temperatures, typically between -40°C to 120°C (-40°F to 250°F), depending on the formulation. This allows it to maintain flexibility and performance in both high and low-temperature environments.

4. Ozone and Weather Resistance:

   • Neoprene is naturally resistant to ozone, sunlight, and weathering, which makes it a reliable material for outdoor applications or in areas with exposure to UV light or extreme weather conditions.

5. Flexibility and Elasticity:

   • The rubber cord maintains good flexibility, which allows it to conform to various shapes and applications while providing a secure, tight seal. It returns to its original shape after deformation, ensuring reliable sealing over time.

n Inflatable Rubber Tube for Air Shaft is a specialized rubber product used in various industrial applications, particularly in machinery that requires an air shaft or inflation system to hold or expand materials. These tubes are designed to fit around shafts and are inflated to apply a secure grip or hold on materials such as paper, film, and textiles in industries like printing, packaging, and manufacturing.

Key Features:

1. Material Composition: Typically made from high-quality rubber compounds like EPDM, nitrile, or neoprene, inflatable rubber tubes are durable and resistant to wear, chemicals, and environmental conditions.

2. Inflation Mechanism: These tubes feature an internal inflation system, which allows them to expand or contract depending on the required grip. When inflated, they create a tight fit around the shaft, helping to secure materials during processes like winding, unwinding, or tensioning.

3. Customizable Sizes: Inflatable rubber tubes can be customized in terms of diameter, length, and wall thickness to suit different shaft sizes and applications. They can also be tailored to meet the specific requirements of the machinery they are used in.

4. Seamless Fit: The tubes are designed to ensure a seamless, tight fit, minimizing the risk of slippage during operation. This feature is particularly crucial in high-speed or high-precision processes.

5. Ease of Installation: The tubes are easy to install and replace. They often come with valves or connections that allow for quick inflation or deflation without requiring specialized equipment.

Applications:

• Printing: In the printing industry, inflatable rubber tubes are used to hold rolls of paper or other materials on printing presses. The tube inflates to grip the material securely and ensures it stays in place during printing.

• Textile and Fabric: These tubes are used in textile processing machinery to hold fabrics and materials in place during the manufacturing or processing stages.

• Packaging: In packaging, inflatable rubber tubes are used for controlling the tension of films, labels, or wraps during production.

• Paper and Film Industries: Used to grip large rolls of paper, film, and foil on unwinders and rewinders, ensuring smooth and controlled movement.

Rubber cord is a flexible, durable, and versatile product made from rubber compounds, widely used in sealing, industrial, and mechanical applications. It is available in a variety of rubber types, including silicone, nitrile, EPDM, neoprene, and others, each offering specific properties suited to different environments and requirements.

Key Features:

1. Material Variety: Rubber cords are made from a range of materials, each offering distinct advantages:

   • Nitrile (NBR): Resistant to oils and fuels, commonly used in automotive and industrial applications.

   • EPDM: Excellent resistance to weathering, ozone, and aging, often used in outdoor and high-temperature environments.

   • Silicone: Known for high-temperature tolerance and flexibility, used in food and medical applications.

   • Neoprene: Resistant to weather, oils, and chemicals, often used in seals and gaskets.

2. Flexibility and Strength: Rubber cords provide excellent flexibility, enabling them to bend and stretch as required while maintaining their strength and durability. This makes them ideal for dynamic sealing applications where constant movement is involved.

3. Customizable: Rubber cords can be cut to the desired length and shape, providing a customizable solution for various sealing or fastening needs. They can also be joined to create custom gaskets or O-rings.

4. Durability: Rubber cords are resistant to wear, abrasion, ozone, UV rays, and extreme temperatures, ensuring long-term performance in harsh environments.